| OMEGA IWB |
|
Beautifully contoured, form fitting and detailed are just a few words to describe this inside the waistband holster. The curved outside lines assist the wearers’ ability to conceal the weapon while at the same time, maximizing comfort from the typical right angles and hard protrusions seen on many IWB holsters. The design of this holster is not only aesthetically pleasing to the eye, but also attempts to merge the human frame with the firearm, achieving comfort and anonymity. Directional, “Pull the Dot” snaps are used for the belt loops to confidently secure the holster in place. The loops are spaced apart in such a way as to allow for a clean, unobstructed draw and presentation of the firearm. All hardware is countersunk and covered to avoid snags on clothing or cuts on skin.
Notes: Made only in black unless otherwise specified.
Reinforced mouth aids in one handed
reholstering.
Gun model not listed? Call or
e-mail
to check on availability.
|
| KELLY IWB TUCKABLE |
|
This holster is designed for deep concealment, affording the wearer nearly 2.5 inches of generous tuck. Because of the hard molded design and precision detailing, one handed re-holstering is easily performed. This holster does not collapse under the tension of a belt due to the rigidity of its structure. The Kydex arms can be vertically positioned up to three different heights on either side and can also rotate clockwise and counter clockwise to manage cant. All hardware is countersunk and covered to mitigate snags on clothing. This is simply one of the most concealable holsters available. Optimum concealment is achieved through the thinness of leather and contoured, form fitting design. Additionally, there are three different styles of Kydex arms to choose from to accommodate the wearers concealed carry needs; Slim Line, J Hook and Standard. Available for most large and medium autos.
Note: Made only in black unless otherwise specified
Gun model not listed? Call or
e-mail
to check on availability.
|
| HARRIS COMBAT QUALIFIER (HCQ) |
|
This hip holster is designed for hand gunners who prefer the security of a thumb break
system, while enjoying the speed of an open top design. Made from the highest quality
cow hyde, double stitched and hand boned both front and back, the fit of this holster to
your weapon is second to none. The belt slots are punched in a parallel position to one
another as well as the overall cant of the weapon. This allows the weapon to conform
closer to the body for added concealment. You will notice there is a longer slot in the
front of the holster, just before the front belt slot. This deeply cut groove allows for a
much cleaner and extremely quick draw and presentation. The cant of the holster is
sufficient enough to enhance your draw, but not too deep as to fail to adequately hide
the rear sites and hammer.
Available for most full, medium and small autos.
Gun model not listed? Call or
e-mail
to check on availability.
|
| DEF-CON SIG |
|
Originally designed by holster maker Gary Brommeland, this “strong side” holster is ideal for everyday carry.
Introduced back in 1989, the DEF-CON has redefined the level of performance expected from this style of holster. Draw speed is enhanced by a cut down front edge and it sports a very highly defined mold and detailed boning that serve to provide proper retention of the weapon, yet still allow instant access when needed. If you pay very close attention, you’ll see a design detail found (to my knowledge) only on the DEF-CON. Look at the rear belt slot. See anything different? All other holsters of this type have a rear slot that angles AWAY from the trigger guard. This relaxes tension on the top of the holster where it is needed most (to off - set the grip heavy tendencies of an auto pistol). The rear belt slot on the DEF-CON angles TOWARD the trigger guard, pulling the weapon much closer to the body, eliminating that annoying “flapping” against the body while running or engaging in other physical activities. This belt slot arrangement also encourages the holster mouth to stay open to facilitate one-handed reholstering. Available in butt-forward configuration only for Sig Sauer 229 and 226 models. 1 1/2” belt slot is standard.
Gun model not listed? Call or
e-mail
to check on availability.
|
| SENIOR AGENT |
|
|
 |
 |
|
|
PRICE: $110.00
[ Click images to enlarge ] |
|
Simple in design, but extremely graceful and well contoured. This hip holster is made
for the Smith and Wesson 340 PD and 360 PD models. Hand boned on the front and
back for both design aesthetics and security, the Senior Agent rides close to the body
and will stay holstered during rigorous activity. The stitch lines on this holster are clean,
smooth and a mirror image of the outline of the weapon. The name of this holster is
reflective of old school senior agents who preferred wheel guns over autos for their
reliability. This holster is as reliable and simple as the weapon it is designed to carry.
Gun model not listed? Call or
e-mail
to check on availability.
|
| HIGH RIDE ABRAZO (HRA) |
|
This holster is designed for those who prefer their firearm to ride higher and closer to the body. Nearly 75% of the holster is molded away from the body, leaving the remaining 25% pressed tightly against you. This design can be worn directly on, or just behind the hip. A standard thumb break and extremely detailed molding, ensure a safe, secure fit. The passive, butt forward cant expedites draw and presentation, while at the same time does not mitigate concealablilty. Adhesive padding can be found on hardware to protect the finish on your pistol.
Available for most medium and large autos.
Gun model not listed? Call or
e-mail
to check on availability.
|
| GREEN'S LANTERN |
|
Original design made by Mark Green, old school holster maker and fellow LEO. This holster is made for hand gunners who prefer to have their tactical light with them 100% of the time. The holster is made from sturdy 8-9 oz. cow hyde, has a higher ride to assist in concealing the added bulk of the tactical light and a passive forward cant for ease of draw and presentation. Capable of accommodating most standard tactical light designs. Available for most medium to large autos.
Gun model not listed? Call or
e-mail
to check on availability.
|
| ANNAN S.O.B. (Small
Of Back) |
|
|
 |
 |
|
|
PRICE: $110.00
[ Click images to enlarge ] |
|
The Annan S.O.B. (Small of Back) is designed for more experienced gun carrying professionals. Not recommended for everyone, but certainly one of the most concealable holsters available as it is worn on the small of the back or just off center from the small of the back, closer towards the kidney area. This holster is ideal for cooler weather conditions where an outer garment is required. Retention of the weapon is made through an extremely tight stitch line and precise molding.
Gun model not listed? Call or
e-mail
to check on availability.
|
| ULRICH ANKLE |
|
This ankle holster is made from high quality Herman Oak leather. Hook and loop Velcro is used for the strap area, which is threaded through a double “D” ring and fastened on the ankle band. You will notice there is no thumb break. This is not necessary as the holster is molded and stitched tight enough, that a fully loaded weapon will not fall out by accident or in a struggle (even when shook upside down), but will allow you to draw it when needed. The flaps on the slide area protect the rear sights and slide from scratches and dings. Anyone who utilizes an ankle holster for normal carry has struck their weapon on something at some point. Note the round dimple in the trigger guard area. This serves as a locking mechanism, much like what you see with Kydex style holsters. The tight stitching also ensures a secure fit.
Available in compact and sub-compact autos.
Gun model not listed? Call or
e-mail
to check on availability.
|
| ULRICH PULL THROUGH |
|
The same as the Ulrich Ankle Holster, this design is for those who carry revolvers such as the S&W 340 PD and 360 PD. The holster is mounted on the same style ankle band and secured with the same strap and double “D” ring.
Available for small revolvers.
Gun model not listed? Call or
e-mail
to check on availability.
|
| ABRAZO BELLY BAND (ABB) |
|
Spanish for hug, or embrace, this system is designed to be worn underneath your outer garment. This is a belly band like no other as it allows you to re-holster with one hand, much like any other hip or cross draw system. 99% of the belly bands available for hand gunners fail to comply with the need to re-holster with one hand. In “real world” application, this is not an acceptable standard for serious gun carry.
The Holster is available in either strong side or cross draw configuration. Two “D” rings allow for a shoulder strap to prevent the system from falling down. This strap can be adjusted infinitely. A tie down is located below the muzzle of the weapon to assist in draw for ease of presentation. Both of these components work together to allow the wearer comfort in carry and ease of draw and re-holstering. A 3” elastic band wraps around the body and is secured by hoop and loop Velcro. Ideal for those who fly armed or do casual undercover operations.
Gun model not listed? Call or
e-mail
to check on availability.
|
|
|
 |
